Open 24/7 · Seymour's Heating & Air Team Since 2013
Heating & Furnace Repair in Seymour, TN
Gas, Propane or Electric, We'll Get the Heat Back On
Ambient Services Plus repairs gas, propane and electric furnaces for homes in Seymour, Sevierville, Pigeon Forge, Gatlinburg and Maryville, including split systems and package units. We’re open 24/7. Call (865) 366-1789 and a person in our office answers and gets a technician on the schedule. Gas mains don’t reach every home in Sevier and Blount counties, so our technicians work on all three fuels. If your home heats with a heat pump, see our heat pump repair page.
Furnace Blowing Cold Air or Not Turning On? Check These First
A furnace that blows cold air or won’t start usually comes down to one of four simple causes, and you can check all of them in a few minutes:
- Thermostat: set to Heat, a few degrees above room temperature, with fresh batteries. If the fan is set to On instead of Auto, it blows room-temperature air between heating cycles.
- Power: check the furnace’s breaker in your panel and the switch on or near the furnace, which looks like a light switch.
- Filter: a clogged filter can make the furnace overheat and shut its burners off.
- Propane tank: if you heat with propane, check the gauge on the tank.
If those check out, turn the system off so it stops trying to start, and call us.
If you smell gas or your carbon monoxide alarm goes off, get everyone out of the house, and once you’re well away from it, call 911 and your gas company. For natural gas, that’s Sevier County Utility District (865-453-3272) in parts of Sevier and Blount counties or KUB (865-524-2911) in Knoxville; the name is on your bill. For propane, call your propane supplier. Once the gas is cleared, we’ll repair the furnace.
What Usually Fails, by Type of Furnace
Here’s what we usually find on each type:
| Your system | What usually fails |
|---|---|
| Gas furnace | Dirty flame sensor, failed igniter, inducer motor or pressure switch, gas valve. |
| Propane furnace | The same parts as a gas furnace, plus the regulator, or a tank that ran low. |
| Electric furnace | Heating elements, sequencers or relays, a breaker that keeps tripping. |
| Package unit | Any of the above, housed in one cabinet outside the home. Common on manufactured homes. |
| Heat pump | See our heat pump repair page. |
How Much Does Furnace Repair Cost?
Furnace repair cost comes down to two things: which part failed and how hard the furnace is to reach. A flame sensor, igniter or capacitor sits at the low end. An inducer motor, gas valve or control board costs more. A cracked heat exchanger usually makes a new furnace the better buy, and we’ll say so plainly. A furnace tucked into a tight crawlspace or attic takes longer to work on than one in a closet or garage, and parts for an older furnace sometimes have to be ordered. Once we find the problem, you’ll get the price before the repair begins.
Repair turning into a replacement? Wisetack financing is available for qualified customers. →
Why Call Ambient Services Plus for Heating Repair
Open 24/7
Call (865) 366-1789 any time, including nights, weekends and holidays.
Heating, Electrical and Plumbing
If the problem is the circuit feeding the furnace, or the cold got to your pipes before the heat came back, our electricians and plumbers take it from there.
Carrier Factory Authorized Dealer
We sell and service Carrier furnaces, heat pumps and air conditioners.
NATE-Certified Technicians
NATE certification means a technician has passed national exams on heating and cooling work. We've been based in Seymour since 2013, rated 4.9 stars from more than 250 Google reviews.
When Do Furnaces Fail Around Seymour?
Most furnace failures around Seymour show up on the first cold nights of fall or on the coldest few nights of winter. Freezing nights start in November, and the Knoxville area averages more than 60 a year, most of them from December through February. Only about 10 nights a year drop below 20°F, and those are the hardest test: a heat pump leans on its backup heat, and a weak igniter or tired inducer motor finally quits. If your system hasn’t been checked since last winter, October or early November is the time. Our maintenance plan includes a fall heating check.
Ambient Services Plus is based in Seymour, TN 37865, and we repair furnaces in Seymour, Sevierville, Pigeon Forge, Gatlinburg and Maryville. Not sure we come to your area? Call (865) 366-1789 and ask.
What Ambient Heating and Air Customers Say
Heating & Furnace Repair FAQs
My propane tank ran out. Can you relight the furnace?
Call your propane company first. When a tank runs completely empty, Tennessee requires the propane company to leak-test the system before it refills the tank and relights your appliances. If the furnace still won’t light or keeps shutting off once the gas is back, call us at (865) 366-1789. To avoid a run-out, order more propane when the tank gauge reads about 30%.
My heat didn't come back on after the power went out. What should I do?
Most furnaces and heat pumps restart on their own when the power returns. If yours doesn’t, check its breaker and the furnace power switch, then make sure the thermostat is still set to Heat. A gas or propane furnace that tried to light while the power flickered can lock itself out. Turn its power switch off for a few minutes, then back on, to reset it. If it locks out again, call us.
Should I repair or replace my furnace?
Repair usually makes sense on a furnace under about 15 years old with a single, affordable problem. Past 15 years, it’s worth pricing a replacement alongside the repair. A common rule of thumb, the “$5,000 rule,” multiplies the furnace’s age by the repair price: above $5,000, replacement usually wins. If it’s close, ask us to price both. We install new Carrier furnaces and heat pumps, with Wisetack financing for qualified customers.
Do you repair all furnace brands?
Yes. We’re a Carrier dealer, but we repair the other major furnace brands too, whoever installed them.
